Product
Castillian Elegance – Cascade | 25981
Width: 7.5"
Thickness: 5/8"
Mullican’s Castillian collection is one of the most exquisite selections of engineered hardwood flooring ever designed. Precision manufactured from the finest European White Oak, Castillian Elegance is a 5/8-inch thick sawn, premium grade engineered flooring with a clean grain and impeccable appearance. Castillian Elegance offers wirebrushed treatments, NWFA Certified Refinishable wear layers, extra wide 7.5-inch planks and random extended lengths up to six feet. All Castillian products carry a 50-year finish warranty.
Color: Cascade
Width 7.5"
Finish Warranty
| Collection | Castillian Elegance |
|---|---|
| Construction | Engineered European White Oak Hardwood |
| Species | European White Oak |
| Color | Cascade |
| Texture | Wirebrushed |
| Finish | Aluminum Oxide Finish |
| Edge | Beveled edge / beveled end |
| Janka Rating | 1360 |
| Origin | Vietnam |
| Width | 7.5" |
| Length | Random board lengths up to six feet |
| Thickness | 5/8" |
| Finish Warranty | 50-year warranty |
| Wear Layer Thickness | 4.0 mm |
Skill Level
Level Two
Installation experience
We always recommend professional installation. If you're planning to install these floors yourself, be sure to thoroughly review your installation instructions. Find a professional installer in your area by visiting the National Wood Flooring Association.
Where to install this floor
Any grade
Engineered hardwood floors can be installed at any grade level. It's especially ideal for below-grade spaces like basements.How to install this floor
Floating
Unlike traditional solid hardwood strips, a floating floor isn't nailed down. Instead, the planks are either glued or snapped together, sitting atop a 1/8-inch thick layer of foam layered on the subfloor, but not directly adhered to it.
Nail-down
Nail-down installation is a method commonly used for solid hardwood floors and follows the same method as staple-down installation, but you use a nail rather than a staple.
Staple-down
Staple-down installation is utilized for prefinished, engineered hardwood flooring using a narrow-crown stapler to fasten your flooring to wood subfloors.Floor trims & molding
Quarter round
Quarter round molding is used to cover the expansion space near a wall. Quarter round may also be used with a new or existing base molding.
Reducer strip
A reducer strip is used as a transition from one flooring to another of a different height.
Stair nose
Stair nose molding is used as a transition on stair steps and sunken dens.
T-Molding
T–Molding is used as a transition between two hard surface floors of equal height. A t-mold may be used to bridge wood floor and ceramic tile.
Threshold
Threshold molding is used at raised hearths and exterior doors. A threshold is also used as a transition from wood to carpet.Alternate Options
-
MuirfieldSolid Maple HardwoodNaturalWidth: 3"Thickness: 3/4"Made in USASKU 14729
-
St. AndrewsSolid Oak HardwoodGunstockWidth: 3"Thickness: 3/4"Made in USASKU 14693
-
ChatelaineSolid Maple HardwoodAutumnWidth: 5"Thickness: 3/4"Made in USASKU 10714
-
St. AndrewsSolid Oak HardwoodStirrupWidth: 2 1/4"Thickness: 3/4"Made in USASKU 10934
423-283-4695
