Product
Wexford – Charcoal | 23554
Width: 4"
Thickness: 3/4"
![Made in USA logo](png/madeinusa.png)
Inspired by the great castles and villas of Europe, Wexford solid hardwood flooring is crafted with a EuroSawn process that combines the best of the three traditional North American sawing techniques. The result is a wider plank with gorgeous plain sawn near the center, flanked by unique rift and quarter sawn on the edges. This creates a classic visual with natural characteristics only found in hardwood flooring.
Color: Charcoal
Collection | Wexford™ |
---|---|
Construction | Solid White Oak Hardwood |
Species | White Oak |
Color | Charcoal |
Texture | Wirebrushed |
Finish | PPG Ultra Low Gloss Finish |
Edge | Beveled edge / beveled end |
Janka Rating | 1360 |
Origin | USA |
Width | 4" |
Length | Random board lengths up to six and a half feet |
Thickness | 3/4" |
Finish Warranty | Lifetime finish warranty |
Skill Level
![](png/skill-level-three-300x23.png)
Level Three
Installation experience
We always recommend professional installation. If you're planning to install these floors yourself, be sure to thoroughly review your installation instructions. Find a professional installer in your area by visiting the National Wood Flooring Association.
Where to install this floor
![](png/grade-at-or-above-300x165.png)
At or above grade
Solid hardwood floors are only appropriate to install in locations that are at-grade or above-grade.How to install this floor
Nail-down
Nail-down installation is a method commonly used for solid hardwood floors and follows the same method as staple-down installation, but you use a nail rather than a staple.![](png/icon-staple-229x300.png)
Staple-down
Staple-down installation is utilized for prefinished, engineered hardwood flooring using a narrow-crown stapler to fasten your flooring to wood subfloors.Floor trims & molding
![](png/icon-quarter-round-300x254.png)
Quarter round
Quarter round molding is used to cover the expansion space near a wall. Quarter round may also be used with a new or existing base molding.![](png/icon-reducer-strip-300x223.png)
Reducer strip
A reducer strip is used as a transition from one flooring to another of a different height.![](png/icon-stair-nose-300x132.png)
Stair nose
Stair nose molding is used as a transition on stair steps and sunken dens.![](png/icon-t-molding-300x168.png)
T-Molding
T–Molding is used as a transition between two hard surface floors of equal height. A t-mold may be used to bridge wood floor and ceramic tile.![](png/icon-threshold-300x212.png)