Product
Wexford – Autumn Bronze | 23573
Width: 5"
Thickness: 3/4"
Inspired by the great castles and villas of Europe, Wexford solid hardwood flooring is crafted with a EuroSawn process that combines the best of the three traditional North American sawing techniques. The result is a wider plank with gorgeous plain sawn near the center, flanked by unique rift and quarter sawn on the edges. This creates a classic visual with natural characteristics only found in hardwood flooring.
Color: Autumn Bronze
Finish Warranty
| Collection | Wexford™ |
|---|---|
| Construction | Solid White Oak Hardwood |
| Species | White Oak |
| Color | Autumn Bronze |
| Texture | Wirebrushed |
| Finish | PPG Ultra Low Gloss Finish |
| Edge | Beveled edge / beveled end |
| Janka Rating | 1360 |
| Origin | USA |
| Width | 5" |
| Length | Random board lengths up to six and a half feet |
| Thickness | 3/4" |
| Finish Warranty | Lifetime finish warranty |
Skill Level
Level Three
Installation experience
We always recommend professional installation. If you're planning to install these floors yourself, be sure to thoroughly review your installation instructions. Find a professional installer in your area by visiting the National Wood Flooring Association.
Where to install this floor
At or above grade
Solid hardwood floors are only appropriate to install in locations that are at-grade or above-grade.How to install this floor
Nail-down
Nail-down installation is a method commonly used for solid hardwood floors and follows the same method as staple-down installation, but you use a nail rather than a staple.
Staple-down
Staple-down installation is utilized for prefinished, engineered hardwood flooring using a narrow-crown stapler to fasten your flooring to wood subfloors.Floor trims & molding
Quarter round
Quarter round molding is used to cover the expansion space near a wall. Quarter round may also be used with a new or existing base molding.
Reducer strip
A reducer strip is used as a transition from one flooring to another of a different height.
Stair nose
Stair nose molding is used as a transition on stair steps and sunken dens.
T-Molding
T–Molding is used as a transition between two hard surface floors of equal height. A t-mold may be used to bridge wood floor and ceramic tile.
Threshold
Threshold molding is used at raised hearths and exterior doors. A threshold is also used as a transition from wood to carpet.Alternate Options
-
MuirfieldSolid Hickory HardwoodProvincialWidth: 4"Thickness: 3/4"Made in USASKU 14593
-
MuirfieldSolid Maple HardwoodAutumnWidth: 4"Thickness: 3/4"Made in USASKU 14595
-
ChatelaineSolid Hickory HardwoodProvincialWidth: 5"Thickness: 3/4"Made in USASKU 10510
-
Knob CreekSolid Hickory HardwoodSaddleWidth: 3"Thickness: 3/4"Made in USASKU 14742
423-283-4695
