Product
Revival – New Dawn | 23524
Width: 6.5"
Thickness: 7/16"
Revival is one of a kind, crafted with our unique heat-treating technique called carbonization to create an unmatched rich, natural look. The sliced 7/16-inch thick engineered planks feature the tight grain patterns of White Oak enhanced with a lightly wirebrushed treatment. Revival is protected by an aluminum oxide finish and backed by a 50-year finish warranty.
Color: New Dawn
Width 6.5"
Finish Warranty
| Collection | Revival |
|---|---|
| Construction | Engineered White Oak Hardwood |
| Species | White Oak |
| Color | New Dawn |
| Texture | Wirebrushed |
| Finish | Aluminum Oxide Finish |
| Edge | Micro-beveled edge / micro-beveled end |
| Janka Rating | 1360 |
| Origin | USA |
| Width | 6.5" |
| Length | Random board lengths up to six feet |
| Thickness | 7/16" |
| Finish Warranty | 50-year warranty |
| Wear Layer Thickness | 1.2 mm |
Skill Level
Level Two
Installation experience
We always recommend professional installation. If you're planning to install these floors yourself, be sure to thoroughly review your installation instructions. Find a professional installer in your area by visiting the National Wood Flooring Association.
Where to install this floor
Any grade
Engineered hardwood floors can be installed at any grade level. It's especially ideal for below-grade spaces like basements.How to install this floor
Floating
Unlike traditional solid hardwood strips, a floating floor isn't nailed down. Instead, the planks are either glued or snapped together, sitting atop a 1/8-inch thick layer of foam layered on the subfloor, but not directly adhered to it.
Glue
This installation method involves gluing your new flooring directly to the subfloor using a hardwood flooring adhesive.
Staple-down
Staple-down installation is utilized for prefinished, engineered hardwood flooring using a narrow-crown stapler to fasten your flooring to wood subfloors.Floor trims & molding
Quarter round
Quarter round molding is used to cover the expansion space near a wall. Quarter round may also be used with a new or existing base molding.
Reducer strip
A reducer strip is used as a transition from one flooring to another of a different height.
Stair nose
Stair nose molding is used as a transition on stair steps and sunken dens.
T-Molding
T–Molding is used as a transition between two hard surface floors of equal height. A t-mold may be used to bridge wood floor and ceramic tile.
Threshold
Threshold molding is used at raised hearths and exterior doors. A threshold is also used as a transition from wood to carpet.Alternate Options
-
St. AndrewsSolid Oak HardwoodCaramelWidth: 2 1/4"Thickness: 3/4"Made in USASKU 10930
-
St. AndrewsSolid Oak HardwoodCaramelWidth: 3"Thickness: 3/4"Made in USASKU 14691
-
MuirfieldSolid Hickory HardwoodProvincialWidth: 5"Thickness: 3/4"Made in USASKU 14594
-
Knob CreekSolid Hickory HardwoodSaddleWidth: 4"Thickness: 3/4"Made in USASKU 14007
423-283-4695
